Currently using a 2hp with a Super Dust Deputy. I have 5" hose to the machine and then step done to 4" at the machine, except for my planer. I am getting a 3hp cyclone that has one 8" or three 4" outlets. Should I just use the 4" hose, or take two 4" pieces of hose from two of the three outlets, then both hoses connect to a 5" wye adapter (with 4" to 5" adapters) run 5" hose to machine, the reduce to 4" again. I'm thinking with the 5" hose feeding two 4" outlets I may be able to increase air flow and speed over the straight 4".
Thoughts?
Thoughts?
Advice on Hose Size
0 commentaires:
Enregistrer un commentaire