Hi All,
I have an issue that is becoming worse. I hope someone can shed some light.
I have an Epilog Mini set up with a HP laptop and Corel. When I start working I send jobs to the laser without issues, however if I wait 5-10 minutes before I send another job I lose connectivity over the Ethernet. I have to unplug wait then reconnect the Ethernet connection to fix the problem. If I am not on top of it I'll send 2 or 3 jobs and they all pile up in que, then sometimes they will all go through, sometimes not. A few times I have had to shut off the Epilog and restart.
This may not be the laser, it could be the computer, but I am a little lost with the problem.
The Ethernet addresses are set up per the manual (with the aid of Epilog support when I first received the machine).
This is a new problem in the last two months.
Let me know if anybody has experienced this and found a solution.
Thank you,
Dave
I have an issue that is becoming worse. I hope someone can shed some light.
I have an Epilog Mini set up with a HP laptop and Corel. When I start working I send jobs to the laser without issues, however if I wait 5-10 minutes before I send another job I lose connectivity over the Ethernet. I have to unplug wait then reconnect the Ethernet connection to fix the problem. If I am not on top of it I'll send 2 or 3 jobs and they all pile up in que, then sometimes they will all go through, sometimes not. A few times I have had to shut off the Epilog and restart.
This may not be the laser, it could be the computer, but I am a little lost with the problem.
The Ethernet addresses are set up per the manual (with the aid of Epilog support when I first received the machine).
This is a new problem in the last two months.
Let me know if anybody has experienced this and found a solution.
Thank you,
Dave
Epilog connection issue
0 commentaires:
Enregistrer un commentaire