Hi there,
So, I've been spraying General Finishes Enduro on my cabinet doors. I noticed that after drying, a bunch of 1/8" spider cracks are occurring on the edges of some of the pieces. I say some because there are a bunch that seem to be fine. I'm using some of their extender in the mix and I had been using denatured alcohol to wipe of the dust after sanding. I'm spraying indoors at about 72 degrees and about 10% humidity. I would assume contamination but I'm not 100% sure yet. Does anyone have an idea what would be causing that?
Thanks, Chris
So, I've been spraying General Finishes Enduro on my cabinet doors. I noticed that after drying, a bunch of 1/8" spider cracks are occurring on the edges of some of the pieces. I say some because there are a bunch that seem to be fine. I'm using some of their extender in the mix and I had been using denatured alcohol to wipe of the dust after sanding. I'm spraying indoors at about 72 degrees and about 10% humidity. I would assume contamination but I'm not 100% sure yet. Does anyone have an idea what would be causing that?
Thanks, Chris
Water-based polyurethane - Spider cracks on edges?
0 commentaires:
Enregistrer un commentaire